BriskHeat Joins the M.S. Jacobs Lineup

industrial heaters
M.S. Jacobs is pleased to announce its new representation agreement with BriskHeat Corporation. The industrial heaters manufactured by BriskHeat complement many of the other quality products handled by M.S. Jacobs.

BriskHeat manufactures a broad line of heaters, insulators, and controls for almost every industrial application.

  • Cloth Heating Jackets and Insulators
  • Heating Tapes
  • Heating Cable
  • Laboratory Heaters and Equipment
  • Etched Foil Heaters
  • Silicone Rubber Heaters
  • Drum Heaters
  • Tote Tank / IBC Heaters
  • Gas Cylinder Warmers
  • Enclosure Heaters
  • Hopper Heating Systems
  • Personal Comfort Heating Solutions
  • Hazardous-Area Heaters
  • Plastic Bending Heaters
  • Resistance Wire
  • Temperature Controllers
  • Temperature Controllers for Outdoor Use
  • Insulators
  • Heaters and Controls with Canadian Approvals
  • Composite Curing Solutions
Share your industrial and process heating requirements with the product specialists at M.S. Jacobs & Associates. Combining your process expertise with their product knowledge will produce effective solutions.

Analynk Wireless For Process Control Connectivity



Analynk Wireless is an innovative designer and supplier of wireless instrumentation for the process control industry. Their instruments and equipment have been successfully implemented in numerous applications for temperature measurements, 4-20 mA bridges, discrete inputs/outputs, pulse inputs, lighting and pump controls. Analynk's products are used in both hazardous and non-hazardous locations. Watch the short video for a animated overview of Analynk products and capabilities.

Share your wireless connectivity challenges with product specialists. Combining your process knowledge with their expertise with produce effective solutions.

Gentherm GPT Provides Turnkey Remote Power

thermoelectric generators
Thermoelectric Generators, part of  a remote power system
There are many industrial operations and processes that operate outside the confines of a factory building. Some even operate outside the confines of what most consider "civilization". Sometimes, if you need electric power, you have to generate your own.

Gentherm Global Power Technologies specializes in providing equipment and complete systems to produce electric power at remote sites. Their signature product line is the thermoelectric generator, or TEG. It uses a solid state thermopile and gas fired heaters to generate DC current. The technology is especially useful at sites where gas is naturally present. As a turnkey systems provider, Gentherm GPT will design complete systems, customized and configured for each particular installation. Here is an example of a fuel gas conditioning system provided for an offshore oil rig, designed specifically to address an issue at the site.

GPT's power generation products are well suited for a wide array of applications.

  • Oil, gas, product, or water pipelines
  • Well sites
  • Offshore platforms
  • Telecommunication sites
  • Well monitoring and automation
  • Security and surveillance
  • Navigational aids
  • Communication systems
For your remote power generation projects, consider a thermoelectric generator. Contact a product specialist and share your requirements. Combining your project knowledge with their product expertise will produce an effective solution.




Don't Ignore the Simple Solution for Flow Measurement

flow indicator flow meter with fluid observation window
Flow indicator also permits visual
inspection of fluid
Courtesy ERDCO Engineering Corp.
For process control and commercial or industrial applications, there are numerous methods of flow measurement from which to choose. Technologies range from very simple applications of physical principles to deployment of very specialized electronics and sensors. The available range of accuracy, response, and cost is quite broad, with a general expectation that higher cost will deliver better performance and accuracy.

Making the best instrument selection for a flow measurement application should include an assessment of what the operators really need in order to safely and effectively run the process or perform the task related to the measurement of fluid flow. Installing instrumentation with capabilities far beyond what is required is almost certainly a waste of financial resources, but may also have an unexpected impact on operators. Through the generation of data that, while accurate, does not provide any actionable information about process condition, operators can be misled, similar to the occurrence of a false or nuisance alarm. Some applications call for high accuracy, some do not. Define your informational needs and select instruments that will meet those needs.

There is a large array of applications that can be satisfied with simpler, less costly measurement technology. These devices often employ turbines or vanes to produce an indication of flow rate. Incorporated into some of the instruments is a means to visually observe the flowing liquid to verify color and clarity. Simple devices sometimes are intended only to indicate the presence of fluid flow, and whether the flow rate is high or low. Configurations are available that allow insertion into lines under pressure (hot tap) through a full port ball valve. Other variants with combinations of features and capabilities abound.

The selection range is enormous, so define your minimum needs first, then search for a compatible product. Your search can be enhanced by contacting an instrumentation specialist. Combining your process expertise with their broad product knowledge will produce effective solutions.